11ac 900Mbps Outdoor CPE
Model: CPE200
Description:
CPE200 is an economic 11ac outdoor CPE with 900Mbps data rate. Comply with IEEE 802.11b/g/n/ac standard, with 12dBi dual polarized high gain antenna, the PTP/PTMP distance is more than 2000 meters.
It support Wireless AP, Wireless Bridge operation mode for PTP/PTMP connections, with slid switch on device, easy to set CPE200's operation mode, no need to access into GUI, avoid the complex setup program; With LED display, simple to set the IP address, channel and view the connected status and signal strength, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.
CPE200 with ABS waterproof, dustproof and sunscreen shell, temperature adaptive also; Meantime, it support 24V passive PoE, ESD protection and surge protection, ideal for outdoor use;
Most Important, CPE200 support watchdog self-detection function, reboot and recover device automatically if some network attack. Besides that, it support cloud remote management and software AC controller, administrator can monitor the working status, upgrade firmware, reboot, timed reboot device through cloud server, recover and maintain device at any time and any location, operator level outdoor PTP/PTMP connection equipment.
Specification: |
Hardware: |
Chipset |
Media Tek: MT7628DAN+MT7613AE |
DDR2 |
64MB |
Flash |
8MB |
Wireless |
IEEE 802.11 a / n /ac, 2T2R 900M MIMO Technology |
Frequency |
5.150GHz~5.850GHz |
Data Rate |
900Mbps |
WAN |
1 * 10/100Mbps RJ45 WAN Port |
LAN |
1 * 10/100Mbps RJ45 LAN Port |
Buttons |
1 * Slid Switch to change the operation mode, H mean host, AP mode; C mean client, Repeater mode |
1 * LED display with F(function) and S(select) buttons, show and set operation mode, channel, IP address, signal strength. |
1 * Reset Button, press 1 second, work with slid switch to change the operation mode; Press 10 seconds, the device will revert to factory default settings. |
Antenna |
12dBi Panel Antenna |
RF Power |
≤ 21dBm |
PoE Power |
POE 24V/0.5A |
Power consumption |
< 8W |
Waterproof Level |
IP65 |
ESD Protection Standard |
Contact Discharge: ±6KV; Air Discharge: ±8KV |
Surge Protection Standard |
Common mode:±2KV; Differential mode:±1KV (Optional: Common mode:±4KV; Differential mode:±2KV) |
LED Light |
Sys(System), WAN, LAN, Wi-Fi |
Size |
168mm*88mm*47.6mm |
Working Temperature |
-30°C ~ 55°C |
Storage Temperature |
-40°C ~ 70°C |
Humidity |
5% ~ 95% (Non-condensing) |
Firmware |
Operation Mode |
Wireless AP, Wireless Bridge |
Protocol/Standard |
IEEE 802.3(Ethernet) |
IEEE 802.3u(Fast Ethernet) |
IEEE 802.11b/g/n/ac(5.8G WLAN) |
Other Features |
SSID: up to 4 |
Support SSID hide |
Wireless security: OPEN,WPA,WPA2,WPA-PSK,WPA2-PSK |
Wireless MAC filter: support white list(32) |
Wi-Fi timed off/on |
User isolation: wireless network isolation, AP insolation |
RF power adjustable |
Support Watchdog Technology |
With Wi-Fi Channel Analysis Tool |
Central Managed by WLAN Controller in AP Mode Remote Managed by Cloud Server in AP and Repeater Mode |
Device Management |
Backup the configuration information |
Restore the configuration information |
Revert to factory default |
Restart: Immediately restart or timed restart |
Firmware upgrade |
Time management: system time management and synchronization time. |
System Log |
Package: |
CPE200M unit |
24V/0.5A PoE Adapter |
User Manual |
LAN Cable |