| Type: | Outdoor CPE |
|---|---|
| Work Mode: | AP+STA |
| WiFi Antenna Type: | Built-in |
| Samples: |
|---|
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 2.4G 300M 11N PTP PTMP 5KM high power waterproof IP65 openwrt outdoor CPE
CPE830D is an 300Mbps high power outdoor CPE/AP. Comply with IEEE 802.11b/g/n standard, adopt AR9531chipset, 14dBi dual polarized high gain antenna, 800mW/29dBm high power, the transmit/receive wireless distance more than 3000 meters.
It support Wireless AP, Gateway, WISP, Wireless Bridge, WDS pass through operation mode, effective solution for PTP, PTMP application and outdoor long range wifi coverage appliation.
CPE-830 with ABS waterproof, dustproof and sunscreen shell, temperature adaptive and board protective, Meantime, it support Power over Ethernet, support passive PoE, easy in setup even no power socket nearby, ideal for outdoor use;
Besides that, CPE-830 with LED signal light to show signal strenght, easy to find a suitable place of outdoor CPE, then firmware comply with AC controller system and Cloud Management System, which helpful in central management and data setting, to implement Advertisement and authenction function, save much human work and cost, more professional in outdoor wireless networking solution.
Specification: |
|||
| Hardware: | |||
| Chipset | Atheros 9531 | ||
| Wireless | 802.11N, 2T2R 300M MIMO Technology | ||
| Memory | 64MB DDR2 RAM (128MB available by extra cost) | ||
| Flash | 16MB | ||
| Interface | 2 10/100 Mbps RJ45 Port, support 12~24V PoE | ||
| 1 Reset Button | |||
| 1 DC Jack, 12V Power Supply | |||
| Antenna | 14dBi Panel Antenna | ||
| LED Light | POWER WIFI WAN LAN S1(GPIO9) S2(GPIO14) S3(GPIO11) S4(GPIO12) | ||
| Size | L 257mm ,W: 87mm,H: 38 mm | ||
| Power | 12V(POE 48V)/1A;110V/220V | ||
| RF Data | |||
| RF Data | 802.11b/g/n: | ||
| 2.4~2.4835GHz | |||
| Korea,Japan,ETSI,FCC | |||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | ||
| DSSS = DBPSK, DQPSK, CCK | |||
| Data Rate | 300 Mbps | ||
| Receive Sensitivity | 802.11n(2.4GHz) | 802.11g | 802.11b |
| -90dBm @ MCS0 | - 90dBm @ 6Mbps | - 95dBm @ 1Mbps | |
| -72dBm @ MCS7 | - 72dBm @ 54Mbps | - 90dBm @ 11Mbps | |
| -90dBm @ MCS8 | |||
| -68dBm @ MCS15 | |||
| RF Output Power | |||
| 802.11n(2.4GHz)(± 1.5dBm) | 802.11g(± 1.5dBm) | 802.11b(±1.5dBm) | |
| 29dBm@ MCS0~2/MCS8~10 | 29dBm @ 6~24Mbps | 29dBm @1~11Mbps | |
| 29dBm @ MCS3/MCS11 | 28dBm @ 36Mbps | ||
| 28dBm @ MCS4/MCS12 | 28dBm @ 48Mbps | ||
| 28dBm @ MCS5/MCS13 | 26dBm @ 54Mbps | ||
| 26dBm @ MCS6/MCS14 | |||
| 26dBm @ MCS7/MCS15 | |||
| Firmware | |
| Operation Mode | Wireless AP, Gateway, WISP, Wireless Bridge |
| Protocol/Standard | IEEE 802.3(Ethernet) |
| IEEE 802.3u(Fast Ethernet) | |
| IEEE 802.11b/g/n(2.4G WLAN) | |
| Wireless | Auto-Channel selection |
| Distance Control (802.1x Ack timeout) | |
| BSSID | |
| Security | WEP Encryption-64/128/152 bit |
| WPA/WPA2 Personal (WPA-PSK using TKIP or AES) | |
| WPA/WPA2 Enterprise (WPA-EAP using TKIP) | |
| Hide SSID | |
| System Setting | Web-based configuration (HTTP/Telnet) |
| Firmware upgrade | Upgrade firmware via web browser or TFTP |
| Administration | Admin Password can be configured |
| System monitoring | Status in hand , useful statistic and Event log |
| Log | Supports local logs, logs host, logs file export |
| Reset | Reset or factory defaults |
| Backup | Restore settings & configuration of the device to local file |
| Physical Property | |
Temperature |
Working: -20°C~70°C |
| Storage: -40°C to 85°C | |
| Humidity | 10%~95% (typical) |
| Package: | |
| CPE830 unit |
|
| PoE Adapter | |
| User Manual | |
| LAN Cable | |
| Frequency range(MHz) | 2400~2500 |
| Polarization | Vertical and Horizontal |
| Gain(dBi) | 2×14 |
| Half-power beam width(°) | H: 65 V: 30 |
| Front-to-back ratio(dB) | ≥25 |
| Input Impedance(Ω) | 50 |
| VSWR | ≤1.5 |
| Isolation between ports | ≥28dB |
| Cross-polar ratio | ≥15dB@0º ≥10dB@+/-60º |
| Sidelobe suppression for first sidelobe above horizon | 15 dB |
| Maximum input power(W) | 200 |
Shenzhen Yunlink Technology Co., LTD is a professional wireless networking equipment manufacturer and solution provider. With excellent technology, high quality and perfect service, It supply OEM & ODM products and solutions for world-wide clients..
Focused on WiFi Technology, Shenzhen Yunlink Technology Co., Ltd develop and produce Wireless Networking equipment mainly, such as 11ac serials & 11n serials Ceiling Wireless Access Point, Outdoor CPE, In wall Access Point, Wireless Router & WiFi Repeater; Ethernet (PoE) Switch, Access Controller System, WLAN Adapter, 3G/4G Router, Etherprise Router, Cloud Server.POE wireless 300m access point/WiFi Access Point/Router/wireless Repeater/, ceiling AP.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}