| Type: | Outdoor Ap/Base Station |
|---|---|
| Work Mode: | AP+STA |
| WiFi Antenna Type: | External |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier HW-AP2200 is a Qualcomm Solution 11ac high power industrial use Outdoor access point with tri-band, 2200Mbps Wi-Fi speed (2.4GHz 300Mbps, 5.8GHz 900Mbps, 5.8G 900Mbps), equipped with Gigabit WAN port, fast Ethernet data rate make 200 end users access into it, to enjoy the seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks, useful in high-density user access environment.
Outdoor shell with Lightning Protection, Temperature Adaptive
HW-AP2200 with metal IP67 level waterproof, dust proof and sunscreen shell, PCB board support Common mode ±6KV Different mode ±2KV lightning protection, which avoids damage from dust, and thunderstorm weather. Meantime, it is adaptive to various environments, the working temperature can be normal at -30ºC to 70ºC, Suit for any country and any environment.
High Power design, N connector for external antenna, more range and stable signal
Designed in Power Amplifier on PCB board, the power can be 300mW high power, N-type water proof connector,can connect with panel/omni outdoor antenna based on request, greatly increase the Wi-Fi range and supply the stable Wi-Fi signal for users.
Power over Ethernet
HW-AP2200 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
MU-MIMO, Wave2.0 Technology
Comply with Wave2.0 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 8 Spatial Steams, greatly to improved the communication efficiency.
Beamfrorming, DFS, Airtime Fairness, Band Steering, OFDM support
HW-AP2200 support many functions like Beamfrorming, DFS(Dynamic Frequency Selection), Airtime Fairness, Band Steering ( 5G Prior), OFDM(Orthogonal Frequency Division Multiplexing), RF Power adjustable to improve the performance and Wi-Fi stability.
WLAN Controller Central/Remote Management, Captive Portal support
Work with WLAN controller in wireless AP operation mode, easily realize the central and remote management, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....
Besides that, it support captive portal authentication like Member/SMS/no authentication login, make this device more professional in Wi-Fi Projects.
Main Features:
| Hardware: | |||||
| Chipset | Qualcomm IPQ4019+QCA9886+QCA8075 | ||||
| Standard | 802.11ac/b/g/n, MU-MIMO technology | ||||
| Memory | 512MB DDR3 RAM | ||||
| Flash | 32MB | ||||
| Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port | ||||
| 1 * 10/100 / 1000Mbps RJ45 LAN Port (Inside of shell) | |||||
| 1 * Reset button, press 10 seconds to revert to default setting | |||||
| Antenna | 6 * N type connector, work with 6PCS 6dBi omni antennas. | ||||
| Power consumption | 48V PoE<30W | ||||
| Size | 183mm*183mm*43mm | ||||
| Water Proof Level | IP65 | ||||
| RF Data | |||||
Frequency |
2.4G: 802.11b/g/n: 2.4GHz - 2.484GHz | ||||
| 5GHz:802.11a/n/ac MIMO: 5.150GHz~5.850GHz | |||||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM | ||||
| DSSS = DBPSK, DQPSK, CCK | |||||
| Throughput | 2200Mbps | ||||
| 2.4G RF Power (IPQ4019) | 802.11b | 11M | 23±2dBm | 1M | 25±2dBm |
| 802.11g | 54M | 22±2dBm | 6M | 24±2dBm | |
| 802.11n HT20 | MCS7 | 21±2dBm | MCS0 | 23±2dBm | |
| 802.11n HT40 | MCS7 | 21±2dBm | MCS0 | 23±2dBm | |
| 5G RF Power (IPQ4019) |
802.11a | 54M | 19±2dBm | 6M | 21±2dBm |
| 802.11n HT20 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
| 802.11n HT40 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
| 802.11ac HT80 | MCS9 | 17±2dBm | MCS0 | 19±2dBm | |
| 5G RF Power (QCA9886) |
802.11a | 54M | 19±2dBm | 6M | 21±2dBm |
| 802.11n HT20 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
| 802.11n HT40 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
| 802.11ac HT80 | MCS9 | 17±2dBm | MCS0 | 19±2dBm | |
| 2.4G Receive Sensitivity | 802.11b | 11M | -85dBm | 1M | -94dBm |
| 802.11g | 54M | -72dBm | 6M | -90dBm | |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm | |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm | |
| 5G Receive Sensitivity | 802.11a | 54M | -72dBm | 6M | -90dBm |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm | |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm | |
| 802.11ac HT80 | MCS9 | -58dBm | MCS0 | -85dBm | |
| EVM | 2.4G EVM: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28dB 5G EVM: 802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB |
||||
| PPM | ±20ppm | ||||
| Max Users | 256 | ||||
| Firmware Features: | |||||
| Operation mode | Wireless AP, Gateway, WISP, Wi-Fi Repeater | ||||
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) | ||||
| Wireless Security | 64/128-bit WPA / WPA2(PSK/AES) encryption | ||||
| SSID | Multiple SSID (4 SSID for 2.4G, 8 SSID for 5.8G) | ||||
| Firewall | IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding |
||||
| Protocols | IPv4 | ||||
| Others: | |||||
| Package Contents | 2200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
||||
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux | ||||
| Environment | Operating Temperature: -20~55 ºC Limit working temperature: -30~70 ºC Storage Temperature: -40~70 ºC Humidity: 5%~95% non-condensing |
||||
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management System | ||||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}