|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Type: | Managed Gigabit Poe Switch |
| Work Mode: | AP+STA |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | SPM-2404GFB |
| CPU | RTL8382M+2 × RTL8218B+RTL8214FC |
| PoE IC | 3×RTL8238B |
| Standard | IEEE802.3 10BASE-T Ethernet IEEE802.3u 100BASE-TX Fast Ethernet IEEE802.3ab 1000BASE-T Gigabit Ethernet ANSI/IEEE 802.3 NWay Auto-negotiation IEEE 802.3z (Gigabit Ethernet fiber standard) |
| Ports | 24*10M/100M/1000M RJ45 support 48V PoE+, 802.3af/at, max power 30W each port; 2*10M/100M/1000M up-link 2*1000M SFP 1*Console(RJ45) |
| Port attributes | Connector Type: RJ-45, SFP Supoort 10M/100M/1000 Mbit/s Support half-duplex, full-duplex, and auto-negotiation working modes Supoort MDI/MDI-X Auto-adaptive |
| PoE | IEEE 802.3af(15.4W),IEEE 802.3at(30W) |
| Exchange Mode | Store-and-forward mode |
| Packet forwarding rate | 41.66Mpps |
| Backplane bandwidth | 56Gbps |
| MAC address table | Maximum supported MAC addresses: 8K Support automatic address learning and automatic aging |
| Status Indicator | SYS (green light): The light is solid green when the system is started, flashes when a fault is detected, and goes out when the system is not started. Each port (2 green lights): The first one is always on when Link is on and flashes when Act; the second one is always on when PoE is powered and turns off when PoE is not powered. |
| Power consumption | Power consumption of the whole machine (without POE load) <24W |
| Input Power | AC 100 V~240 V 50/60 Hz DC 54V 7A (12V 2A) |
| Network cable type | 10Base-T: Cat3, 4, 5 or above UTP/STP(≤100m) 100Base-TX : Cat5 or aboveUTP/STP(≤100m) 1000Base-TX : Cat5 or above UTP/STP(≤100m |
| Szie | 440×300×44mm |
| ESD | Air±8KV, touch±6KV |
| Surge | Normal±2KV, difference±1KV |
| EMC | Class A |
| Working environment | Working temperature: -10ºC ~ +40ºC; Storage temperature: -40ºC ~ +70ºC; Humidity: 5% ~ 95% (no condensation) |
| Cooling method | Built-in fan cooling |
| Gigabit Port Quantity | 24*POE RJ45, 2*uplink RJ45 |
| SFP Port Quantity | 2*SFP |
| Enable/Disable Port | Support |
| Port auto-negotiation | Support port auto-negotiation |
| Supports forced port mode and speed | |
| Port flow control | Support full-duplex IEEE 802.3x flow control |
| Support half-duplex back pressure flow control | |
| Broadcast Storm Control | Support rate limiting for broadcast, multicast and DLF packets |
| Port Storm Suppression | Supports detection of broadcast packets, multicast packets and unicast packets of ports respectively, and closes ports when the threshold is exceeded. |
| Port Mirroring | Support |
| Port rate limit | Support port input and output port speed limit |
| Link Aggregation | Support manual link aggregation |
| Support LACP dynamic link aggregation | |
| Supports up to 8 aggregation groups, each supporting up to 8 ports | |
| Support source MAC, destination MAC, source and destination MAC, source IP, destination IP, source and destination IP routing strategies | |
| Protected Ports | Each port can be configured as a protection port isolated from each other. |
| Redundant ports | Support |
| Jumbo Frame | Support, the maximum supported data packet is 16K |
| Detect network cable distance | Support |
| POE Power | |
| Switch Control | Support turning on and off the POE power supply of the port |
| Power Control | Support setting total power |
| Other advanced features | Support setting the POE scheduling strategy of the port and support PD online query |
| MAC Configuration | |
| MAC table capacity | 8K |
| MAC table management | Support |
| Forwarding Mode | Support IVL forwarding mode |
| Static MAC address | Support |
| MAC address binding | Support |
| MAC address filtering | Support |
| MAC learning control | Control the number of MAC addresses learned based on the port |
| VLAN Configuration | |
| VLAN quantity | 4K |
| 802.1q-based VLAN | Support |
| MAC-based VLAN | Support |
| IP-based VLAN | Support |
| Protocol-based VLAN | Support |
| Voice VLAN | Support |
| VLAN Mapping | Support 1:1 mapping |
| Double VLAN tagging | Support basic QinQ |
| Support flexible QinQ | |
| Reliability Protocol | |
| Spanning Tree Protocol | Support STP/RSTP/MSTP |
| Port loop detection | Support |
| EAPS protocol | Support RFC3619 |
| ERPS protocol | Support G.8032/Y.1344 |
| LLDP protocol | Support LLDP and LLDP-MED |
| UDLD protocol | Fully compatible with CISCO's UDLD protocol |
| Host Routing | |
| ARP | Support static and dynamic ARP |
| Static Routing | Supported, but not supported for Layer 3 forwarding |
| VLAN interface | Support 32 VLAN interfaces |
| Multicast functions and protocols | |
| Static multicast MAC address | Support |
| IGMP SNOOPING | Support |
| MLD SNOOPING | Support |
| MVR | Support |
| GMRP protocol | Support |
| ACL Access Control List | |
| Standard IP-based ACL | Support |
| ACL based on extended IP | Support |
| ACL based on MAC and IP | Support |
| MAC ARP-based ACL | Support |
| ACL port filtering | Support |
| Time-based ACL | Support |
| QoS | |
| Number of port queues | 8 |
| Port queue scheduling mode | Supports WRR, SP, and WFQ scheduling modes. |
| Based on port classification | Support |
| Based on 802.1p classification | Support |
| Based on DSCP (DiffServ) classification | Support |
| ACL-based data flow classification | Support |
| QoS Policy | Supports mapping of data packets to corresponding output queues |
| Supports modifying COS and DSCP marks of data packets | |
| Support data flow rate limit | |
| Support data flow statistics | |
| Supports mirroring of data streams | |
| DHCP | |
| DHCP Client | Support |
| DHCP Snooping | Support |
| DHCP Relay | Support |
| DHCP Server | Support |
| DHCP option 82 | Support |
| Management Features | |
| CLI management | Support serial port management switch |
| Support TELNET management switch | |
| Support SSH management switch | |
| WEB management | Support |
| SNMP management | Support SNMP v1, v2c, v3 |
| Support SNMP TRAP | |
| Supports a wide range of standards and private MIBs | |
| User Management | Support multi-user management |
| TACACS+ | Supports remote username and password authentication via TACACS+ server |
| Supports PAP and CHAP password encryption | |
| Support TACACS+ server to authorize switch commands | |
| Log Management | Support local log management |
| Support SYSLOG IPv4 and IPv6 | |
| RMON | Support RMON 1, 2, 3, 9 groups |
| Cluster Management | Support neighbor discovery protocol |
| Support topology discovery protocol | |
| Supports manual and automatic joining of cluster groups | |
| Support unified cluster management | |
| OAM | Support 802.3ah |
| Support 802.1ag | |
| Configuration file upload and download | Support |
| Upgrading software | Support |
| Clock Management | Support local clock management |
| Support SNTP protocol to obtain clock | |
| Safety Features | |
| Switch Management Security Supports binding of TELNET, WEB and SNMP services with standard IP ACL |
Support opening and closing TELNET, WEB and SNMP services |
| Supports binding of TELNET, WEB and SNMP services with standard IP ACL | |
| Support limiting the number of TELNET connections | |
| CPU Protection | The switch itself is protected against attacks by large data flows. |
| AAA | Support 802.1x protocol |
| Support RADIUS protocol | |
| Supports authentication, authorization and accounting through RADIUS server | |
| Supports port-based and MAC-based 802.1x | |
| Support 802.1x guest VLAN | |
| IP MAC address binding | Support static configuration of IP, MAC and port binding |
| DHCP SNOOPING | Support dynamic ARP binding to prevent ARP spoofing |
| Support dynamic IP, MAC and port binding | |
| Support fixed port to connect to DHCP server to prevent private connection to DHCP server | |
| Preventing ARP Spoofing | Supports manual configuration of MAC ARP-based ACL rules to prevent ARP spoofing |
| Support DHCP SNOOPING function. When obtaining IP address through DHCP, the switch dynamically binds ARP to the port to prevent ARP spoofing. | |
| IPv6 Protocol | |
| IPv6 Address | Supports manual configuration and stateless address automatic configuration |
| IPv6 Neighbor Discovery Protocol | Support |
| ICMPv6 Protocol | Support |
| IPv6 Path Discovery Protocol | Support |
| Switch | 1 |
| Rack kit | 2 |
| Power cord | 1 |
| Gift Box | 1 |
){kind=link}