| Customization: | Available |
|---|---|
| Type: | WiFi Bridge |
| Work Mode: | AP+STA |
|
Still deciding? Get samples of US$ 44/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
500mW RF Power outdoor wifi extender Comply with IEEE 802.11ac/a/n build in 14dBi MIMO panel antenna
Description:
CPE850Q is an high power industrial 5G outdoor CPE with 5KM PTP/PTMP range. Comply with the next generation 802.11ac Wi-Fi standard, Qualcomm Chipset, combined 900Mbps high speed in 5.8G, equipped Gigabit WAN port, 3 times Ethernet data rate faster than 300Mbps model; It with LED display to show and configure CPE's operation mode, Channel, IP address and Signal Strength, simple to do the Point to Point connection by reset button, no need to access into GUI.
900Mbps Data Rate & Gigabit WAN/LAN Ports
CPE850Q features 802.11ac Wi-Fi and 2*2 MIMO technology, 900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.
5GHz frequency, more channels, lower latency, higher stability
CPE890DH with full frequency of 5020~6100MHz, more than 200 channels available, it avoid the frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
5KM PTP/PTMP Distance
Designed in two line Power Amplifier on PCB board, the power can be 300mW high power, 15dBi MIMO high gain panel antenna, greatly increase the Wi-Fi range to 5KM distance, then supply the stable Wi-Fi signal for users.
LED Display
CPE850Q with LED display to show AP/Client operation mode, Channels, IP address and RF Power; What's more, it is easy to setup CPE850Q operation mode, IP address, Channels by set switch on product, no need to access into GUI, avoid the complex setup program, simple to check the working status.
Power over Ethernet
CPE850Q has integrated IEEE802.3af 48V PoE, (passive Power over Ethernet is optional), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Main Features:
| Hardware: | |||||
| Chipset | Qualcomm | ||||
| Standard | 802.11ac/a, MIMO technology | ||||
| Memory | 128MB DDR2 RAM | ||||
| Flash | 16MB | ||||
| Interface | 1 * 10/100/1000Mbps RJ45 WAN Port | ||||
| 1 * 10/100/1000Mbps RJ45 LAN Port | |||||
| 1 * LED display, 1 * F(Function) switch button, 1 * S(Select) button, press it to setup WDS PTP/PTMP connection | |||||
| 1 * Reset button, press 15 seconds to revert to default setting/press 1 seconds to finish the WDS PTP/PTMP connection | |||||
| Antenna | Build in 15dBi MIMO Panel Antenna | ||||
| Power consumption | 48V PoE, <15W | ||||
| ESD | ±6KV | ||||
| Surge | ±2KV | ||||
| Water Proof Level | IP65 | ||||
| Size | 260mm * 85 mm * 45mm | ||||
| RF Data | |||||
Frequency |
5GHz: 802.11a/ac | ||||
| 5GHz: Standard: 5150~5825MHz, Debug: 5020~6100MHz | |||||
| Throughput | 900Mbps | ||||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | ||||
| DSSS = DBPSK, DQPSK, CCK | |||||
| Receive Sensitivity& RF Power | |||||
| RF Power | 802.11a | 54M | 22±2dBm | 6M | 25±2dBm |
| 802.11n HT20 | MCS7 | 21±2dBm | MCS0 | 24±2dBm | |
| 802.11n HT40 | MCS7 | 20±2dBm | MCS0 | 23±2dBm | |
| 802.11ac HT80 | MCS9 | 19±2dBm | MCS0 | 22±2dBm | |
| Receive Sensitivity | 802.11a | 54M | -72dBm | 6M | -90dBm |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 . | -88dBm | |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 . | -86dBm | |
| 802.11ac HT80 | MCS9 | -58dBm | MCS0 . | -85dBm | |
| EVM | 802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB | ||||
| Firmware Features: | |||||
| Operation mode | Wireless AP, Client | ||||
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption | ||||
| SSID | Multiple SSID up to 4 | ||||
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding |
||||
| Protocols | IPv4 | ||||
| Others: | |||||
| Package Contents | 900Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
||||
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux | ||||
| Environment | Operating Temperature: -30~55 ºC Storage Temperature: -40~70 ºC Humidity: 5%~95% non-condensing |
||||
| Management | Firmware GUI ,Remote Management, WLAN Controller, Cloud Management System | ||||
){kind=link}