| Customization: | Available |
|---|---|
| Type: | WiFi Bridge |
| Work Mode: | AP+STA |
|
Still deciding? Get samples of US$ 47/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
802.11ac wifi receiver and transmitter equipped with 14dBi panel antenna supportl ong range PTP/PTMP
Description:
512AC is an 11ac Wave2.0 standard industrial 5.8G outdoor CPE. It comply with the next generation 802.11ac Wi-Fi standard, MU-MIMO, Qualcomm Chipset, combined 867Mbps high speed in 5.8G, equipped Gigabit RJ45 port and PoE support, it can be applied in all over the world for long range PTP/PTMP.
High Power, More Range
512AC RF power up to 25dBm, equipped with 14dBi panel antenna, the point to point wireless range up to 4KM distance.
867Mbps Data Rate & Gigabit WAN/LAN Ports
512AC features 802.11ac Wi-Fi and 2*2 MIMO technology, 867Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users access.
5GHz frequency, more channels, lower latency, higher stability
512AC with 4.92GHz to 5.92GHz frequency range, avoid the same frequency interference problem, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
Power over Ethernet
512AC has integrated active 48V Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Product Spec.:
| Hardware: | |
| Chipset | Qualcomm |
| Standard | 802.11ac/a/n, MU-MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100/1000Mbps RJ45 LAN Port |
| 1 * Reset button | |
| 1 * DC button | |
| 1 * AP/Repeater operation mode switch | |
| Antenna | Build in 14dBi MIMO Panel Antenna |
| Power consumption | 48V PoE |
| Size | |
| RF Data | |
| Frequency | 5GHz: 802.11a/ac |
| 5GHz: 4920~5920MHz | |
| Throughput | 867Mbps |
| Receive Sensitivity& RF Power | |
| RF Power | 802.11ac 20MHz BW, MCS0 maximum Tx Power of 24dBm +- 2dBm per chain 802.11ac 20MHz BW, MCS7 maximum Tx Power of 20dBm +- 2dBm per chain 802.11ac 20MHz BW, MCS9 maximum Tx Power of 19dBm +- 2dBm per chain 802.11ac 40MHz BW, MCS0 maximum Tx Power of 24dBm +- 2dBm per chain 802.11ac 40MHz BW, MCS7 maximum Tx Power of 20dBm +- 2dBm per chain 802.11ac 80MHz BW, MCS9 maximum Tx Power of 19dBm +- 2dBm per chain 802.11ac 80MHz BW, MCS0 maximum Tx Power of 24dBm +- 2dBm per chain 802.11ac 80MHz BW, MCS7 maximum Tx Power of 20dBm +- 2dBm per chain 802.11ac 40MHz BW, MCS9 maximum Tx Power of 19dBm +- 2dBm per chain |
| Receive Sensitivity | 802.11ac Rx Sensitivity 20MHz BW, MCS9 -62dBm, MCS7 -67 dBm, MCS0 -89 dBm 802.11ac Rx Sensitivity 40MHz BW, MCS9 -61dBm, MCS7 -66 dBm, MCS0 -88 dBm 802.11ac Rx Sensitivity 80MHz BW, MCS9 -60dBm, MCS7 -65 dBm, MCS0 -87 dBm |
| EVM | 802.11a: ≤-25dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB |
| PPM | ±20ppm |
| Others: | |
| Package Contents | 867Mbps outdoor PTP LAN cable Install Accessory |
| Environment | Operating Temperature: -30~45 ºC Storage Temperature: -40~70 ºC Humidity: 5%~95% non-condensing; |
){kind=link}