| Customization: | Available |
|---|---|
| Type: | Outdoor Access Point |
| Work Mode: | AP+STA |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
YUNCORE® APH 6-AC1200 is an outdoor high-performance dual-band 802.11AC product, which can provide 2.4G and 5.8GHz dual-frequency wireless services, 2.4G up to 300Mbps, and 5G up to 866Mbps.
Main Features:
With better transmission quality, higher transmission rate, and concurrent rate up to 1200Mbps.
Using QCA9563 + QCA9886 + QCA8334 chip, greatly expand the user capacity, can support the number of users for 100 +.
The RF adopts high-power FEM, with stable performance and further coverage.
The lightning protection plate components is added to greatly enhance the protection ability of the equipment.
Hardware Spec:
| Specification parameters | |||||
| product model | APH6-AC1200 | ||||
| CPU | QCA9563+ QCA9886+ QCA8337 | ||||
| Flash | 16MB | ||||
| DDR2 | 128MB | ||||
| 2.4G working frequency band | 2.4GHz - 2.484GHz | ||||
| 2.4G WIFI transmission protocol | 802.11 b / g / n | ||||
| 5G working frequency band | 5.150GHz~5.850GHz | ||||
| 5G WIFI transmission protocol | 802.11 a / n / ac | ||||
| Antenna: 2.4G | 22.4G omni-directional antennas, with each gain: 6 dBi | ||||
| Antenna 5G | 25G antennas, each gain: 6 dBi | ||||
| top speed | 2.4G provides a maximum access rate of 300Mbps, and 5G up to 866Mbps | ||||
| Maximum wireless access support | 128 | ||||
| And 2.4G wireless power | 802.11b | 11M | 21±2dBm | 1M | 23±2dBm |
| 802.11g | 54M | 20±2dBm | 6M | 22±2dBm | |
| 802.11n HT20 | MCS7 | 19±2dBm | MCS0 | 21±2dBm | |
| 802.11n HT40 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
| 5G wireless power | 802.11a | 54M | 19±2dBm | 6M | 21±2dBm |
| 802.11n HT20 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
| 802.11n HT40 | MCS7 | 17±2dBm | MCS0 | 19±2dBm | |
| 802.11ac VHT80 | MCS9 | 16±2dBm | MCS0 | 18±2dBm | |
| 2.4G reception sensitivity | 802.11b | 11M | -85dBm | 1M | -94dBm |
| 802.11g | 54M | -72dBm | 6M | -90dBm | |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm | |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm | |
| The 5G reception sensitivity | 802.11a | 54M | -72dBm | 6M | -90dBm |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm | |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm | |
| 802.11ac VHT80 | MCS9 | -58dBm | MCS0 | -80dBm | |
| 2.4G EVM | 802.11b: ≤-10 dB ;802.11g: ≤-25 dB ;802.11n: ≤-28dB ; | ||||
| 5G EVM | 802.11a:≤-25 dB; 802.11n:≤-28 dB;802.11ac:≤-32 dB ; | ||||
| frequency deviation (ppm) | ±20ppm | ||||
| joggle (WAN) | 110 / 100 / 1000Mbps adaptive WAN port, supporting PoE 48V input; | ||||
| joggle (LAN) | 110 / 100 / 1000Mbps adaptive LAN port | ||||
| External buttons | Set key (press 6-10 seconds to restore factory default configuration) | ||||
| Status indicator light | 5G Hz WiFi lamp: screen printing 5G, green single lamp: 5GHz open often on, off off, flashing when there is data sending and receiving; 2.4G WiFi Light: screen printing 2.4G, green single light: 2.4GHz open often on, off off, flashing when there is data sending and receiving; WAN port lamp: screen printing ETH 2, green single light: UP always on, Down off, there is data shining; LAN port lamp: screen printing ETH 1, green single light: UP always on, Down off, there is data shining; System state light: screen printing SYS, green single light: system state start, always on; abnormal, off; Power lamp: screen printing PWR, green single light: immediately after power on, green light is always on; |
||||
| supply electricity | PoE802.3 at,DC2.0 12V/2 A | ||||
| maximum power dissipation | < 18 W | ||||
| product size | 243.2 mm × 218.3 mm × 64.1 mm | ||||
| weight | TBD | ||||
| work environment | Normal operating temperature: -20°C to 55°C; storage temperature: -40°C to 70°C; humidity: 5%~95% (no condensation) | ||||
| levels of protection | IP67 | ||||
| ESD | Air discharge + / -8K, contact discharge + / -6 K | ||||
| surge | Common mode 2K, difference mode 1K | ||||
| home page | Working mode:, fat AP mode and thin AP mode |
| Wireless AP download rate, wireless AP upload rate, and runtime | |
| Equipment information, equipment description, Intranet information, and WIFI information | |
| Support mode | Gateway mode: the device is connected to the WAN through the WAN port and then connected to the Internet using static IP, DHCP or PP PoE |
| AP mode: Devices cover wireless network signals over other clients and devices, and use Ethernet to connect to other routers for WAN access | |
| Wireless function | SSID broadcasting |
| SSID quantity: 4(2.4GHz) + 4 (5GHz), supporting Chinese SSID | |
| Hide the SSID functionality | |
| Wireless encryption: OPEN, WPA / WPA2PSK-TKIPAES | |
| Wireless MAC address filtering: support whitelist | |
| WiFi is turned off | |
| User isolation: isolation between wireless networks and AP internal isolation | |
| Emission power setting | |
| Limited number of wireless clients | |
| QoS:WMM | |
| Network function | Connection mode: static address, obtained from the management server, obtained from the gateway |
| DHCP server: either built-in DHCP server or external DHCP server | |
| Cloud platform server | |
| Firewall function | |
| PP PoE Function: Support the PP PoE dialing function | |
| device management | Backup Configuration Information |
| Restore configuration information | |
| factory data reset | |
| The boot includes timing restart and immediate restart | |
| firmware upgrade | |
| Time management includes the system display time and time synchronization | |
| system log | |
| Fat and thin AP switching function |
Application
){kind=link}