| Customization: | Available |
|---|---|
| Type: | WiFi Bridge |
| Work Mode: | AP+STA |
|
Still deciding? Get samples of US$ 53/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Dual band Qualcomm 1200M High power 5KM Point to Point outdoor base station wireless CPE
Description:
CPE2200, a high power outdoor WiFi bridge supports WAVE 2, comply with the next generation 802.11ac Wi-Fi standard, 2x2 MIMO technology, 2.4GHz and 5GHz dual band, 1200Mbps data rate, Gigabit WAN/LAN port; With water-proof case, high gain 14dBi WiFi antenna and PoE(Power over Ethernet), it is installed in outdoor environment to reach 3KM PTP/PTMP WiFi range, very good choice in long range data transmission or Wireless security.
ABS weather-proof case
CPE2200 with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, rainy weather. Meantime, it adaptive to various environment, the working temperature can be at -40ºC to 55ºC. Suit for any country.
High Power, High Gain Antenna, more WiFi Range
Designed in two line Power Amplifier on PCB board, the power can be 500mW high power, build in dual band panel WiFi antenna, the PTP/PTMP WiFi range more than 3KM.
Power over Ethernet
CPE2200 has integrated active Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure. Pls note, the default is 48V IEEE 802.3at PoE, 24V Passive PoE is possible by change PCB board.
Multiple Operation Mode
CPE2200 support wireless AP, Gateway, WISP, WiFi Repeater operation mode, max to meet with different operation request.
Main Features:
| Hardware: | |
| Chipset | Qualcomm |
| Standard | 802.11ac/b/g/n, MIMO technology |
| Memory | 128MB DDR2 RAM |
| Flash | 16MB |
| Interface | 1 * 10/100/1000Mbps RJ45 WAN Port, WAN port support IEEE 802.3at standard PoE |
| 1 * 10/100/1000Mbps RJ45 LAN Port | |
| 1 * Reset button, press 15 seconds to revert to default setting | |
| Antenna | Build in Panel antenna, 12dBi in 2.4GHz, 14dBi in 5.8GHz |
| Power consumption | 48V PoE<30W |
| Size | 315mm * 145 mm * 80 mm |
| RF Data | |
Frequency |
2.4G: 802.11b/g/n; 5GHz: 802.11a/n/ac |
| 2.4GHz: 2.312GHz to 2.4835GHz 5GHz: 5.020 - 6.1000 GHz |
|
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK | |
| Data Rate | 1200Mbps (2.4G 300Mbps, 5.8G 900Mbps) |
| Receive Sensitivity & RF Power | |
| RF Power | 2.4G: 11n @MCS7:23±2DB, @MCS0:25±2DB. 11g @54M:24±2DB, @6M:26±2DB. 11b @11M:26±2DB, @1M:28±2DB. 5.8G: 11a @54M:24±2DB, @6M:26±2DB. 11n @MCS7:22±2DB, @MCS0:24±2DB. 11ac @MCS9:21±2DB, @MCS0:23±2DB. |
| Receive Sensitivity | 2.4G: 11n: -70dbm@MCS7, -88dbm@MCS0. 11g: -72dbm@54Mbps, -88dbm@6Mbps. 11b: -85dbm@11Mbps, -94dbm@1Mbps. 5.8G: 11a: -72dbm@54Mbps, -90dbm@6Mbps. 11n: -70dbm@MCS7, -90dbm@MCS0. 11ac:-60dbm@MCS9, -86dbm@MCS0. |
| EVM | 11n: ≤-28 DB 11g: ≤-25 DB 11b: ≤-10 DB 11a: ≤-25 DB |
| PPM | ±20ppm |
| Max Users | 128 |
| Firmware Features: | |
| Operation mode | Wireless AP, Gateway, WISP, WiFi Repeater |
| WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) |
| Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK, 802.1x encryption |
| SSID | Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G) |
| Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding |
| Protocols | IPv4 |
| Others: | |
| Package Contents | 1200Mbps Dual Band wireless access point Ethernet Cable Quick Installation Guide Setting Accessory |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux |
| Environment | Operating Temperature: -40~55 ºC, Storage Temperature: -40~70 ºC Operating Humidity: 10%~90% non-condensing; Storage Humidity: 5%~90% non-condensing |
| Management | Firmware GUI , Remote Management, WLAN Controller, Cloud Management System |
Shenzhen Yunlink Technology Co., LTD is a professional wireless networking equipment manufacturer and solution provider. With excellent technology, high quality and perfect service, It supply OEM & ODM products and solutions for world-wide clients..
Focused on WiFi Technology, Shenzhen Yunlink Technology Co., Ltd develop and produce Wireless Networking equipment mainly, such as 11ac serials & 11n serials Ceiling Wireless Access Point, Outdoor CPE, In wall Access Point, Wireless Router & WiFi Repeater; Ethernet (PoE) Switch, Access Controller System, WLAN Adapter, 3G/4G Router, Etherprise Router, Cloud Server.POE wireless 300m access point/WiFi Access Point/Router/wireless Repeater/, ceiling AP.
){kind=link}