5.8g High Power Outdoor CPE with Poe out for CCTV Ipcam

• Customization: Available
• Type: WiFi Bridge
• Work Mode: AP+STA
• Model NO.: CPE-350D
• WiFi Antenna Type: Built-in
• Transmission Rate: 11n 300Mbps
• Voltage: 48V Poe
• Antenna Gain: 14dBi
• Certification: ISO9001, RoHS, CE
• Origin: China
• HS Code: 851762
• Production Capacity: 10000/Week
• Package Size: 30.00cm * 18.00cm * 8.00cm
• Package Gross Weight: 2.000kg

Product Description

Description:  
CPE-350D is an 5.8G 300Mbps 3KM+ distance outdoor CPE/Wi-Fi Bridge support PoE in and PoE out, It with LED display to show the Channel, IP address and Signal Strength, then with slide switch to change the operation mode, easy to configure the PTP/PTMP connection, advised to install for long range data transmission like CCTV/wireless security/village wireless coverage.

Besides the data transmission, it work as an outdoor PoE switch as LAN port support PoE out for CCTV/IP Camera. Cost saving and easy to find a place to install CPE350D itself and save device cost in long range wireless security.

Main Features:
ABS weather-proof shell, temperature adaptive and board protective .

CPE513P with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Then PCB board with ESD and port surge protection, adaptive to various environment, the working temperature can be normal at -40ºC to 55ºC. Suit for any country.


300Mbps high speed, Atheros industrial chipset, wider application

CPE513P comply with IEEE 802.11a/n standard, 300Mbps high speed, with Atheros industrial CPU, it is a Wi-Fi bridge with low power consumption, strong security. With PTP, PTMP, bridge operation mode, widely be used in voice, video, data transmission in long range wireless monitor industrial.


High Power, 14dBi High Gain Antenna, Long Range Wi-Fi Device in market.

CPE513P with external power amplifier, 300mW true power, 14dBi high gain antenna, the Wi-Fi range is more than 3000 meters, it is the device with most stable performance in long range, max load users, longest Wi-Fi range.


Simple to Configure

It with slide switch to change the operation mode; then with LED display to show and configure the IP address, channel,no need to access into GUI, avoid the complex setup program, simple to check the working status.



Support Power over Ethernet, including PoE in and PoE out

The device has integrated Power over Ethernet (PoE) for easy installation and lower cost. The WAN port support 802.3at 48V PoE in, make device can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure; The LAN port support 802.3af 48V PoE out. Can work as a PoE switch, easy to provide PoE power for IP Camera/CCTV, saved much material cost and human cost.


Hardware Specification

Model	CPE350D
Chipset	Qualcomm
Flash	16MB
RAM	64MB
Standard	IEEE802.3, IEEE 802.11n, IEEE 802.11a
Frequency	5.150GHz-5.825GHz
Channel	CH36 ~CH165
Modulation	OFDM = BPSK,QPSK,16-QAM,64-QAM;DSSS = DBPSK,DQPSK,CCK
Data Rate	300Mbps
RF Output Power	≤ 26dBm
Antenna	14dBi Dual-polarized panel antenna
WAN	1 * 10/100Mbps RJ-45 WAN Port, support 24V or 48V PoE in (Based on the PoE adapter)
LAN	1 * 10/100Mbps RJ-45 LAN Port, support 24V/48V PoE out (Based on PoE in, less than 13W) (Notes: If enabled PoE out function in firmware, then LAN port can't connect with NON-POE device)
LED Display	1 * LED display with F(function) and S(select) buttons, show and set operation mode, channel, IP address, signal strength.
Slid Switch	Operation mode switch, H mean host, AP mode; C mean client, Repeater mode
Reset	1 * Reset Button, press 1 second, work with slid switch to change the operation mode; Press 10 seconds, the device will revert to factory default settings.
Power	Input: POE 24V/1A or 48V/0.5A PoE adapter
LED Light	Power, Wi-Fi, WAN, LAN
Maxi Power Consumption	< 10W
Water-proof Level	IP65
Size(mm)	261.9*88.2*58.2mm
Working Temperature	-30°C ~ 55°C   Extreme Working Temperature can be -40°C ~ 70°C
Storage Temperature	-40°C  ~ 70°C
Humidity	5% ~ 95% (Non-condensing)
Operation Mode	AP, Repeater