Outdoor CPE Ap Omni Antenna 1200Mbps Access Point

• Customization: Available
• Type: Outdoor Ap
• Work Mode: AP
• Model NO.: AP1200-W2
• Transmission Rate: 1200Mbps
• Voltage: 48V Poe/12V DC
• Antenna Gain: 5dBi
• Color: White
• Certification: ISO9001, RoHS, CE
• Transport Package: Color Box
• Trademark: NO
• Origin: China
• HS Code: 8517629900
• Production Capacity: 50000/Month
• Package Size: 30.00cm * 26.00cm * 40.00cm
• Package Gross Weight: 3.000kg

Product Description

11AC 1200Mbps WAVE 2 Outdoor AP IP65 Outdoor Enclosure

Product Description

AP1200-W is the 1200Mbps high power industrial use Outdoor wireless access point with the next generation 802.11ac Wi-Fi standard, support 2x2 MU-MIMO technology, it is dual band, 2.4GHz(300Mbps) and 5GHz(900Mbps), Gigabit WAN/LAN port, the fast Ethernet data rate and clear frequency make 100+ end users can access into it to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks.
 
ABS weather-proof case
AP1200-W with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, rainy weather. Meantime, it adaptive to various environment, the maximum working temperature can be at -40ºC to 55ºC. Suit for any country.
 
High Power, 5dBi omni antenna, more Wi-Fi Range
Designed in two line Power Amplifier on PCB board, the power can be 300mW high power, build in 5dBi omni Wi-Fi antenna, outdoor Wi-Fi range up to 100 meters.
 
Power over Ethernet
AP1200-W has integrated active Power over Ethernet (PoE), for easy installation and lower cost. So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure. Pls note, the default is 48V IEEE 802.3at PoE, 24V Passive PoE is possible by change PCB board.
 
MU-MIMO, Wave2.0 Technology
Comply with Wave2.0 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), greatly to improved the communication efficiency.
 
Beamfrorming, DFS, Airtime Fairness, Band Steering, OFDM support
AP1200-W support many functions like Beamfrorming, DFS(Dynamic Frequency Selection), Airtime Fairness, Band Steering ( 5G Prior), OFDM(Orthogonal Frequency Division Multiplexing), RF Power adjustable to improve the performance and Wi-Fi stability.
 
Access Controller System & Cloud Management System
Work with WLAN controller in wireless AP operation mode,easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore....
 
Then work with Cloud Management System, easy to do central and remote management, advertisement and multi authentication make this device more professional in Wi-Fi Projects.

Main Features:
 

1. Professional outdoor shell design,IP65 dust proof/water proof level.

Adopt ABS outdoor engineering plastic shell and industrial components,to provide IP65 level water proof ,dust proof and lightning protection,adapt to wind,sun,thunderstorm,snow and freeze or other adverse environments,even in extreme high and low temperature(-40ºC -  +70ºC)environment,can work normally and steadily as well

2. With Qualcomm QCA9563 chipset , Flash 16MB .DDR  128MB, greatly improved the data processing performance and allow more end users access

3. Independent external power amplifier circuit and low noise amplifier receiving circuit design

4. Long wireless coverage ,transfer all kinds of data smoothly ,do not have any latency.
AP1200 W2  is a high power  outdoor base station with 160 meters wireless range ,can meet the demands for outdoor wifi project large area coverage , specialize in high power design ,can ensure strong wireless signal and stable performance

5. Comply with IEEE 802.11ac/b/g/n, dual band, 1200Mbps Data Rate

6. RF power is adjustable according to the actual use environment .Reduce mutual WIFI interference between each other to improve wireless stability.

7. Multiple operation mode to meet the different wireless solutions

Hardware Specs:

 

Hardware:
Chipset	Qualcomm QCA9563+QCA9886+QCA8334
Standard	802.11ac/b/g/n, MIMO technology
Memory	128MB DDR2 RAM
Flash	16MB
Interface	1 * 10/100/1000Mbps RJ45 WAN Port, WAN port support IEEE 802.3at standard PoE
	1 * 10/100/1000Mbps RJ45 LAN Port
	1 * DC injector, 12V/2A
	1 * Reset button, press 15 seconds to revert to default setting
Antenna	Build in omni antenna, 5dBi, MIMO
Power consumption	48V PoE<30W
Size	315mm * 145 mm * 80 mm
Frequency	2.4G: 802.11b/g/n;   5GHz: 802.11a/n/ac
	2.4GHz: 2.4GHz to 2.484GHz 5GHz: 5150 -5850 GHz
Modulation	OFDM = BPSK,QPSK, 16-QAM, 64-QAM
	DSSS = DBPSK, DQPSK, CCK
Data Rate	1200Mbps (2.4G 300Mbps, 5.8G 900Mbps)
RF Power	2.4G: ≤23dBm 5G: ≤23dBm
IP Level	IP65
Power consumption	< 20W
ESD	Differential Mode: ±2KV
Max Users	128
Product Size	315mm*145mm*80mm
Firmware Features:
Operation mode	Wireless AP, Gateway, WISP, WiFi Repeater
WAN Type	Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security	WPA / WPA2, WPA-PSK/ WPA2-PSK
SSID	Multiple SSID (4 SSID for 2.4G, 4 SSID for 5.8G)
Firewall	DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter IP and MAC Address Binding
Protocols	IPv4
Others:
Package Contents	1200Mbps Dual Band wireless access point Ethernet Cable                                             Quick Installation Guide Setting Accessory
System Requirements	Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
Environment	Operating Temperature: -30~45 ºC Maximum Working Temperature: -40 ~55ºC( Throughput some attenuation) Storage Temperature: -40~70 ºC Storage Humidity: 5%~95% non-condensing
Management	Firmware GUI , Remote Management, WLAN Controller, Cloud Management System

Working Diagram: