300Mbps Outdoor CPE
Model: AP80Q
Description:
AP80Q is an 300Mbps high power outdoor CPE/AP with omni antenna; It Comply with IEEE 802.11b/g/n standard, adopt Qualcomm chipset, 16MB flash, 64MB SDRAM, 5dBi omni antenna, 1000mW high power, more than 200 meters wifi range, good choice for outdoor wifi signal coverage.
With AP, Router and WiFi Repeater operation mode, it can transmit wifi signal in a certain place for outdoor users, or can bridge the exist wifi signal to extend the range.
AP80Q with ABS waterproof, dustproof and sunscreen shell, temperature adaptive and board protective,suit for outdoor wifi networking projects.
Meantime, it support Power over Ethernet, support passive PoE, easy in setup even no power socket nearby, save much human work and cost.
What's more, AP80Q support multi SSID(up to 4), each SSID comply with IEEE 802.1Q VLAN, then AP80Q work with our AC controller, easy to be configure and setup centrally, what's more, it support Captive Portal Authentication, easy to do ads or ask for login before get inter
Specification: |
| Hardware: |
| Chipset |
Qualcomm QCA9531 |
| Wireless |
802.11N, 2T2R 300M MIMO Technology |
| Memory |
64MB |
| Flash |
16MB |
| Interface |
2 10/100 Mbps RJ45 Port, support 12~24V PoE |
| 1 Reset Button |
| 1 DC Jack, 12V Power Supply |
| Antenna |
5dBi omni Antenna |
| LED Light |
POWER WIFI WAN LAN S1(GPIO9) S2(GPIO14) S3(GPIO11) S4(GPIO12) |
| Size |
L 257mm ,W: 87mm,H: 38 mm |
| Power |
12V(POE 24V)/1A;110V/220V |
| RF Data |
| RF Data |
802.11b/g/n: |
| 2.4~2.4835GHz |
| Korea,Japan,ETSI,FCC |
| Modulation |
OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK |
| Data Rate |
300 Mbps |
| Receive Sensitivity |
802.11n(2.4GHz) |
802.11g |
802.11b |
| -90dBm @ MCS0 |
- 90dBm @ 6Mbps |
- 95dBm @ 1Mbps |
| -72dBm @ MCS7 |
- 72dBm @ 54Mbps |
- 90dBm @ 11Mbps |
| -90dBm @ MCS8 |
|
|
| -68dBm @ MCS15 |
|
|
| RF Output Power |
802.11n(2.4GHz)(± 1.5dBm) |
802.11g(± 1.5dBm) |
802.11b(±1.5dBm) |
| 29dBm@ MCS0~2/MCS8~10 |
29dBm @ 6~24Mbps |
29dBm @1~11Mbps |
| 29dBm @ MCS3/MCS11 |
28dBm @ 36Mbps |
|
| 28dBm @ MCS4/MCS12 |
28dBm @ 48Mbps |
|
| 28dBm @ MCS5/MCS13 |
26dBm @ 54Mbps |
|
| 26dBm @ MCS6/MCS14 |
|
|
| 26dBm @ MCS7/MCS15 |
|
|
| Firmware |
| Operation Mode |
Gateway/AP/WiFi Repeater |
| Protocol/Standard |
IEEE 802.3(Ethernet) |
| IEEE 802.3u(Fast Ethernet) |
| IEEE 802.11b/g/n(2.4G WLAN) |
| Wireless |
Auto-Channel selection |
| Distance Control (802.1x Ack timeout) |
| Multiple SSID (4 SSID) |
| BSSID |
| Security |
WEP Encryption-64/128/152 bit |
| WPA/WPA2 Personal (WPA-PSK using TKIP or AES) |
| WPA/WPA2 Enterprise (WPA-EAP using TKIP) |
| Hide SSID |
| System Setting |
Web-based configuration (HTTP/Telnet) |
| Firmware upgrade |
Upgrade firmware via web browser or TFTP |
| Administration |
Admin Password can be configured |
| System monitoring |
Status in hand , useful statistic and Event log |
| Log |
Supports local logs, logs host, logs file export |
| Reset |
Reset or factory defaults |
| Backup |
Restore settings & configuration of the device to local file |
| Physical Property |
Temperature |
Working: -10°C~55°C |
| Storage: -20°C to 70°C |
| Humidity |
5%~95% (typical) |
| Package: |
AP80Q unit
|
| 24V /1A PoE Adapter |
| User Manual |
| LAN Cable |
Antenna Data:
| Electrical Specifications |
| Frequency range(MHz) |
2400~2483 |
| Bandwidth (MHz) |
83 |
| Gain(dBi) |
5 |
| Front-to-back ratio(dB) |
≥25 |
| Input Impedance(Ω) |
50 |
| Polarization |
Vertical |
| VSWR |
≤2 |
| Maximum input power(W) |
200 |
Product Spec.:
){kind=link}