| Customization: | Available |
|---|---|
| Type: | WiFi Antenna |
| Work Mode: | AP |
|
Still deciding? Get samples of US$ 20/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
300Mbps high power Ceiling Wireless Access Point with MTK Chipset work with Access Control System and Cloud Server
FAP710 is a 300Mbps high power Ceiling Wireless Access Point with MTK Chipset. Comply with IEEE 802.11b/g/n standard, 300Mbps data rate, with MIMO omni antenna inside,support IEEE 802.3af PoE, easy to set up in different environment.
Ceiling Mount case, 8M Flash, 64M DDR2, firmware work with AC controller for central management and captive portal authentication function, it designed specifically for home and business-class environments such as hotels, airports, coffee shops, shopping centers, sporting venues, and university campus.
Stylish Ceiling Mount Design
Housed in a stylish ceiling mountable case, the FAP710 can be installed on a wall or ceiling to blends in nicely with most interior decorations in a modern hotel. With big space and Installed highly on ceiling, it extends optimum wireless signal to multiple neighboring rooms and better heat radiation.
Power over Ethernet
The device has integrated Power over Ethernet (PoE) for easy installation and lower cost, with IEEE 802.3af PoE, it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
WLAN Controller & Cloud Server support
This FAP710 work with Access Control System, easily access advanced network settings through PC, like AP status monitor, change IP address, ESSID, Channel, Password, upgrade firmware, backup and restore...
What's more, this wireless access point work with Cloud Server, easy to do remote management, Advertisement, captive portal authentication, even Billing and Radius supported in the near future, which make this AP more professional in WiFi Projects.
Specification |
|||||
| Hardware | |||||
| MCU | MT7628 | ||||
| RF | 2T2R, 300Mbps MIMO tech , comply with IEEE 802.11b/g/n standard | ||||
| Memory | 64MB DDR RAM | ||||
| Flash | 8MB | ||||
| Interface | 2 x RJ-45 for 10/100Mbps WAN/LAN Port (WAN port support IEEE 802.3af POE) | ||||
| 1 x Reset button(Reset & Factory Defaults) | |||||
| 1 x Power DC Jack | |||||
| Power |
DC: 12V/0.5A; POE: IEEE 802.3af 48V PoE, 110V/220V | ||||
| Antenna | Build in 2PCS Omni 5dbi antenna | ||||
| Size | 188MM × 33MM | ||||
| RF | |||||
| Frequency | 802.11b/g/n, 533MHz | ||||
| 2.4~2.4835GHz | |||||
| U.S.,Europe and Japan product covering 2.400 to 2.4835 GHz,programmable for different country regulations | |||||
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM | ||||
| DSSS = DBPSK, DQPSK, CCK | |||||
| Throughput | 300Mbps | ||||
| Sensitivity | 802.11b | 11M | 17±2dBm | 1M | 19±2dBm |
| 802.11g | 54M | 16±2dBm | 6M | 18±2dBm | |
| 802.11n HT20 | MCS7 | 15±2dBm | MCS0 | 17±2dBm | |
| 802.11n HT40 | MCS7 | 14±2dBm | MCS0 | 16±2dBm | |
| RF Power | 802.11b | 11M | -85dBm | 1M | -94dBm |
| 802.11g | 54M | -72dBm | 6M | -90dBm | |
| 802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm | |
| 802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm | |
| EVM | 802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB |
||||
| PPM | ±20ppm | ||||
| Max Uses | 30 | ||||
){kind=link}